Audio Router commands

Using a connected TCP socket to the configured port (default: 1074) you can instruct the Audio Router to perform tasks and also to give you information.

Simply connect to the port and you can use these commands. To send multiple commands, separate them with a comma (,)

Command	Parameters	Example	Description
SET MUTE	ON/OFF UniqueId/ALL	SET MUTE ON 25 Mute channel 25. SET MUTE OFF ALL Unmute all channels.	Sets the muted status of the channel you specify with the UniqueId. If you use ALL instead of a channel number then this is applied to all channels.
GET MUTE	UniqueId	GET MUTE 25 Get the mute status of channel 25.	Get the muted status of the channel specified by UniqueId. Returns either True or False.
SET VOLUME	UniqueId/ALL Volume%	SET VOLUME 25 50 Set the volume of channel 25 to 50 percent.	Instantly set the volume, in percent, of the channel specified by UniqueId. If you use ALL instead of a channel number then this is applied to all channels.
GET VOLUME	UniqueId	GET VOLUME 25 Get the volume of channel 25.	Get the volume, in percent, of the channel specified by UniqueId. Returns either True or False.
GET SLIDING	UniqueId	GET SLIDING 25 Get the sliding status of channel 25.	Return if the channel specified by UniqueId is currently sliding.
GET DUCKING	UniqueId	GET DUCKING 25 Get the ducking status of channel 25.	Return if the channel specified by UniqueId is currently ducking. Returns either True or False.
SLIDE	UniqueId/ALL Volume% S	SLIDE 25 20 1.5 Slide channel 25 to 20% volume over 1.5 seconds.	Slides the UniqueId channel to the Volume, in percent, over a period of S. If you use ALL instead of a channel number then this is applied to all channels.
SLIDEMS	UniqueId/ALL Volume% MS	SLIDEMS 25 20 1500 Slide channel 25 to 20% volume over 1500 milliseconds.	Slides the UniqueId channel to the Volume, in percent, over a period of MS. If you use ALL instead of a channel number then this is applied to all channels.
DUCK	UniqueId/ALL Volume% HoldS *S	DUCK 25 20 5 0.25 Duck channel 25 to 20% volume and hold it for 5 seconds before returning the channel to its original volume. The speed the fade happens is 0.25 seconds.	Duck the UniqueId channel to the desired Volume, in percent, and hold it at that volume for the time set by HoldS. To change the default travel speed from 250 milliseconds set *S to the required period. If you use ALL instead of a channel number then this is applied to all channels.
DUCKMS	UniqueId/ALL Volume% HoldMS *MS	DUCK 25 20 5000 500 Duck channel 25 to 20% volume and hold it for 5 seconds before returning the channel to its original volume. The speed the fade happens is 500 milliseconds.	Duck the UniqueId channel to the desired Volume, in percent, and hold it at that volume for the time set by HoldMS. To change the default travel speed from 250 milliseconds set *MS to the required period. If you use ALL instead of a channel number then this is applied to all channels.
PLAY STREAM	UniqueId URL	PLAY STREAM 25 "https://mystream.com/mount" Load and play the stream https://mystream.com/mount as soon as it has buffered enough data.	Play a stream directly on the UniqueId channel from the URL specified. The stream will begin playing as soon as there is enough data buffered to play. When playing the stream, if there is insufficient data to continue playing, the stream will be stalled. However, playback will automatically be resumed when sufficient data has been downloaded.
STOP STREAM	UniqueId	STOP STREAM 25 Stops the stream playing, if any, on channel 25.	Stop any stream playing on the UniqueId channel. If no stream is playing then nothing happens.
GET PLAYING	UniqueId	GET PLAYING 25 Return if channel 25 is playing a stream.	Return if the channel specifed by UniqueId is currently playing a stream previously loaded by the PLAY STREAM command. Returns either True or False. If the stream has stalled due to insufficient data then False will be returned.